Delconsegep - Cisco MGX 8850 Command Reference Manual

Chapter 7 SPVC and SVC Commands

delconsegep

Delete Connection Segment Endpoint
Deletes a segment endpoint on a connection. When both VPI and VCI are present, the segment endpoint
is an F5 flow endpoint (for VCCs). When the optional VCI is not present, the segment endpoint is an F4
flow endpoint (for VPCs).
The delconsegep command works for SVCs only.
Note
Cards on Which This Command Runs
PXM45
Syntax
delconsegep <portid>
vpi
[vci]
Syntax Description
portid
vpi
vci
Related Commands
cnfoamsegep, dspoamsegep, cnfconsegep, dspconsegep
Attributes
Log: log
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
The portid represents the PNNI physical port and has the format
[shelf.]slot[:subslot].port[:subport]. See also
VPI of the connection.
VCI of the connection.
State: active
PNNI Format, page
Privilege: GROUP1
Cisco MGX 8850 Routing Switch Command Reference
delconsegep
7-4.
7-33