Delcons - Cisco MGX 8850 Command Reference Manual

delcons

delcons
Delete Connections
Delete a range of ATM connections.
Before entering this command, you need to know exactly how many connections you need to delete.
Caution
This command starts deleting connection endpoints in lexicographic order (dspcons displays in the
same order). Incorrect usage of this command could result in deletion of more endpoints than
necessary, and repairing such damage could be very costly.
Cards on Which This Command Runs
AXSM
Syntax
delcons <ifNum> <vpi> <vci>
[-num <num. conns to del>]
[-verbose < 1 | 0 >]
Syntax Description
ifNum
vpi
vci
-num
-verbose
Related Commands
None
Attributes
Log: no log
Cisco MGX 8850 Routing Switch Command Reference
7-32
The logical port number. The range for AXSM is 1–60.
For a UNI, the range is 0–255. For an NNI, the range is 0–4095.
For a VCC, the range is 32–65535. For a VPC, the only value is 0.
(Optional) Keyword that specifies the number of connections to delete.
(Optional) Keyword that enables (1) or disables (0) verbose mode. In verbose mode,
the screen displays the connection identifier of each connection immediately after it
is deleted.
State: active
Chapter 7
Privilege: SERVICE_GP
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
SPVC and SVC Commands