Dspportsct - Cisco MGX 8850 Command Reference Manual

Chapter 3 Equipment and Resource Provisioning

dspportsct

Display Port SCT
Displays the contents of the service class template (SCT) on a port.
Note Currently, the system does not support certain parameters in the service class templates (SCTs), so
you can specify them through addcon, cnfcon, or Cisco WAN Manager.
These parameters are (when applicable) PCR, SCR, and ICR.
Cards on Which This Command Runs
AXSM
AXSM Syntax
dspportsct <parameter_group> <ifnum>
AXSM Syntax Description
parameter_group
ifnum
Related Commands
addport, cnfport, delport, dspport
Attributes
Log: no log
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
An aspect of the SCT for display:
bw for bandwidth
•
gen for policing and CAC
•
• cosb
• vcThr for VC thresholds
• cosThr for COSB thresholds
Logical interface (port) number. For AXSM, the range is 1–60.
State: active, standby Privilege: ANYUSER
Cisco MGX 8850 Routing Switch Command Reference
dspportsct
3-87