Cisco MGX 8850 Command Reference Manual page 480

delsigdiag
-inport
-outport
-maxrec
-scope
-servctgy
Related Commands
cnfsigdiag, delsigdiag, dspsigstats, clrsigstats
Attributes
Log: log
Cisco MGX 8850 Routing Switch Command Reference
6-62
yes returns the incoming port to the default.
Default: no
yes returns the outgoing port to the default.
Default: no
yes returns the maximum records to the default.
Default: no
yes to disable filtering by scope.
Default: no
yes returns the service category to the default.
Default: no
State: active Privilege: ANYUSER
Chapter 6 Logical Node, Port, and Signaling Commands
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001