Dspsig - Cisco MGX 8850 Command Reference Manual

Chapter 6 Logical Node, Port, and Signaling Commands

dspsig

Display Signaling
Displays the configuration of the signaling timers for the port.
Cards on Which This Command Runs
PXM45
Syntax
dspsig <portid>
Syntax Description
portid
Related Commands
cnfsig
Attributes
Log: nolog
Example
Display the signaling timers and crankback maximum for port 4:1.1:11.
SanJose.7.PXM.a > dspsig 4:1.1:11
Signaling Timers for port : 4:1.1:11
Timer
-----
t301
t303
t308
t310
t316
t317
t322
t397
t398
t399
Max Crankback:
SanJose.7.PXM.a >
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
The portid is the PNNI physical port. The format is [shelf.]slot[:subslot].port[:subport].
See also PNNI Format, page
State: active, standby
Value(secs)
-----------
180
4
30
10
90
60
4
180
4
14
3
6-4.
Privilege: ANYUSER
Cisco MGX 8850 Routing Switch Command Reference
dspsig
6-103