Dsprrtparm - Cisco MGX 8850 Command Reference Manual

dsprrtparm

dsprrtparm
Display Reroute Parameters—displays the current values for two types of reroute intervals.
The dsprrtparm command shows the current slow interval time and fast timer base. See the description
of cnfrrtparm for the function of these intervals.
Cards on Which Command Executes
PXM45
Syntax
dsprrtparm
Syntax Description
This command takes no parameters.
Related Commands
cnfrrtparm
Attributes
Log: no log
Example
Display the current, global reroute parameters for SPVCs. The parameters are the defaults.
8850_NY.7.PXM.a > dsprrtparm
Global SPVC Retry Parameters:
--------------------------------
Slow Retry Interval: 60 sec
Fast Retry Interval Base: 50 (in 100 msec)
Cisco MGX 8850 Routing Switch Command Reference
8-16
State: active, standby Privilege: ANYUSER
Chapter 8 Network Optimization Commands
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001