Cisco MGX 8850 Command Reference Manual page 472

cnfsscop
-norsptmr
-t309tmr
-maxcc
-sndwnd
-rcvwnd
Related Commands
disablesscop, dspsscop, dspsscopstats
Attributes
Log: log
Cisco MGX 8850 Routing Switch Command Reference
6-54
Number of seconds after which at least one STAT PDU must be received (for the No
Response timer). A 0 forces restoration of the default value.
Range: 1–45 seconds
Default: 30 seconds
Number of seconds before SAAL reconnects after disconnection.
Range: 1 –15 seconds
Default: 10 seconds
Maximum number of retries for connection control operations. A 0 forces restoration
of the default.
Range: 1–15
Default: 10
Number of packets the port can send before it must receive an acknowledgment from
the ATM switch. A 0 forces restoration of the default.
Range: 1–127
Default: 30
Number of packets the port can receive before it sends an acknowledgment to the
ATM switch. A 0 forces restoration of the default.
Range: 1–127
Default: 30
State: active Privilege: GROUP1
Chapter 6 Logical Node, Port, and Signaling Commands
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001