Cisco MGX 8850 Command Reference Manual page 40

cc
cc
Change Card
Use cc to change from the current CLI to the CLI of another card. Follow cc with a slot number.
Cards on Which This Command Runs
PXM45, AXSM
Syntax
cc <slot number>
Syntax Description
slot number
Related Commands
None
Attributes
Log: log
Change from the command line of the AXSM in slot 12 to the command line of the PXM45 in slot 8.
MGX8850.12.AXSM.a > cc 8
(session redirected)
MGX8850.8.PXM.a >
If the slot is empty or the card is unreachable, the system displays an applicable message.
Cisco MGX 8850 Routing Switch Command Reference
1-10
The number of the destination card slot.
State: active, standby, init
Chapter 1 Command Line Interface Overview
Privilege: ANYUSER
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001