Upln - Cisco MGX 8850 Command Reference Manual

Chapter 9 Troubleshooting Commands

upln

Up Line
Activates a line on the current card. After you have activated the line, use cnfln to configure the line
characteristics such as the type of line (for SONET types, T3, or E3), line signaling, and so on.
Note See description of cnfcdsct for important planning considerations before you use upln.
Cards on Which This Command Runs
AXSM
Syntax
upln <bay.line>
Syntax Description
bay.line
Related Commands
dspln, dsplns, cnfln, dnln
Attributes
Log: log
Example
Activate line 1 in bay 1.
MGX8850.1.AXSM.a > upln 1.1
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Identifies the bay (1 or 2) and the number of the line. The line number can be 1 to the
highest numbered line on the back card.
State: active Privilege: GROUP1
Cisco MGX 8850 Routing Switch Command Reference
upln
9-159