Dspconinfo - Cisco MGX 8850 Command Reference Manual

Chapter 7 SPVC and SVC Commands

dspconinfo

Display Connection Information—display summaries of connection configuration (SPVCs or SPVPs only)
The dspconinfo runs on the PXM45 and lists the total number SPVCs on each PNNI port on the node.
For each port, the display shows:
•
•
•
•
Cards on Which This Command Runs
PXM45
Syntax
dspconinfo
Syntax Description
This command takes no parameters.
Related Commands
none
Attributes
Log: no log
Example
Display the SPVC summaries for the current node. This example shows all connections as failed.
popeye10.7.PXM.a > dspconinfo
Local Port
-----------------------------------------------------------
2:2.2:1
3:1.1:1
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Number of active connections
Number of failed connections
Number of down connections
Total number of connections
State: active, standby
#Active #Failed
1
1
Privilege: ANYUSER
#Down #Total
0 0 1
0 0 1
Cisco MGX 8850 Routing Switch Command Reference
dspconinfo
7-41