Cisco MGX 8850 Command Reference Manual page 160

users
Example
Display the current users on the switch. Only one user-session is currently running. The user telnetted
to the switch from IP address 10.18.247.21. The idle time is 0 because the current user has just executed
the users command. If other user-sessions were running and one or more were idle, the idle time for each
user would be a non-zero number. Change to the AXSM CLI and execute users.
pop20one.7.PXM.a > users
pop20one.10.AXSM.a > users
Cisco MGX 8850 Routing Switch Command Reference
2-102
Port Slot Idle
-------------------------------------------------------------
telnet.01 * 7 0:00:00
Port Slot Idle
-------------------------------------------------------------
telnet.01 10 0:00:00
smterm.03 * 10 0:00:00
Chapter 2
UserId From
davids4 10.18.247.21
UserId From
cisco 0.0.0.0
davids4 slot 7
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Shelf Management Commands