Cisco MGX 8850 Command Reference Manual page 38

?
?
Help
Use help to view all commands you can execute on the current card and at the current privilege level.
The display does not show commands with a privilege level that is higher than that of the current user.
If you follow the ? with part of a command name, the output shows all commands that contain that string.
If you follow the ? with the complete name of one command, the output simply states whether that
command is available.
If you can enter two parameter strings, help provides information for each of the two strings separately
(not a single, two-part string).
Cards on Which This Command Runs
PXM45, AXSM
Syntax
?
[
command
Syntax Description
command
Related Commands
help
Attributes
Log: no log
Examples
View all commands associated with the partial command string "con."
MGX8850.1.AXSM.a >? con
Available commands
------------------
addcon
clrconcnt
cnfcon
delcon
delcons
dspcon
dspconcnt
dspcons
Cisco MGX 8850 Routing Switch Command Reference
1-8
]
Full or partial name of a command.
State: active, standby, init
Chapter 1 Command Line Interface Overview
Privilege: ANYUSER
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001