Dsppnni-Mtu - Cisco MGX 8850 Command Reference Manual

Chapter 5 PNNI Commands

dsppnni-mtu

Display PNNI Maximum Transfer Unit
The dsppnni-mtu command displays the maximum PNNI packet size in number of bytes. This
command is primarily for configuring internetwork compatibility, but you can use it in lab trials to test
the affect of various packet sizes on the performance of the peer group.
Use cnfpnni-mtu to specify the PNNI packet size configuration.
Cards on Which This Command Runs
PXM45
Syntax
dsppnni-mtu
Display Contents
The following parameters are displayed for each node. The right column shows the label for each value
that appears in the dsppnni-mtu command. The left column maps each value to the corresponding
keyword in the cnfpnni-mtu command, and explains the argument function.
max packet size
Related Commands
dsppnni-idb, cnfpnni-mtu
Attributes
Log: nolog
Example
Displays the maximum packet size.
SanJose.7.PXM.a > cnfpnni-mtu 3002
SanJose.7.PXM.a > dsppnni-mtu
max packet size : 3002
SanJose.7.PXM.a >
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
— display maximum supported size of the PNNI data packet.
The value of the max transmit unit mtu in number of bytes.
Range: 1024–8192
State: active, standby Privilege: ANYUSER
Cisco MGX 8850 Routing Switch Command Reference
dsppnni-mtu
5-73