Dspcdcnt - Cisco MGX 8850 Command Reference Manual

Chapter 9 Troubleshooting Commands

dspcdcnt

Display Card Counters
Displays the number of cells transferred between the service module and the switching planes.
(Synonyms for switching plane are crossbar, xbar, and switch fabric.) One switch fabric is implemented
in hardware by one ASIC. The dspcdcnt command primarily applies to debugging.
The type of information consists of:
•
•
•
•
•
•
•
•
Cards on Which This Command Runs
AXSM
Syntax
dspcdcnt
Related Commands
clrcdcnt (on the AXSM), dspxbar, dspxbaralm, dspxbarerrcnt, dspxbarerrthresh
Attributes
Log: no log
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Cells transferred between the service module and each of the switch planes within the total array of
switch planes.
Total cells transferred between the service module and the backplane.
Cells to and from QE48.
Undefined cells.
Total number of CLP0 and CLP1 cells that have been discarded.
Errored, invalid, and unsupported OAM cells.
Errored RM cells.
Cells transferred between and individual switch plane and each slot. This information is centered on
the switch fabric itself rather than the card. Each switch fabric can route cells to and from any slot,
so the display includes this information for each switching plane.
State: active, standby Privilege: ANYUSER
Cisco MGX 8850 Routing Switch Command Reference
dspcdcnt
9-67