Dsppncons - Cisco MGX 8850 Command Reference Manual

dsppncons

dsppncons
Display PNNI Connections
Displays a summary of active calls on one port or all ports. This command can be issued at any node.
Cards on Which This Command Runs
PXM45
Syntax
dsppncons
[-port portid]
[-vpi starting-vpi]
[-vci starting-vci]
[-type
Syntax Description
-port
-vpi
-vci
-type
Related Commands
dsppncon
Attributes
Log: no log
Cisco MGX 8850 Routing Switch Command Reference
7-52
{ | |
p2p p2mp ctrl}]
The portid represents the PNNI physical port and has the format
[shelf.]slot[:subslot].port[:subport]. See also
Keyword that specifies the VPI at which to begin displaying. This keyword can be used only
if you specify a portid.
Keyword that specifies the VCI at which to begin displaying. This keyword can only be used
if -vpi is used.
Keyword that sets the cast type. Only connections of this cast type will be displayed.
State: active, standby
PNNI Format, page
Privilege: ANYUSER
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter 7 SPVC and SVC Commands
7-4.