Cisco MGX 8850 Command Reference Manual page 195

Chapter 3 Equipment and Resource Provisioning
-max
-sct
Related Commands
addport, delport, dspport, dspports
Attributes
Log: log
Example
For logical port 1, configure a guaranteed minimum of 10000 cps and a maximum rate of 20000 cps.
MGX8850.1.6.AXSM.a > cnfport -if 1 -min 10000 max 20000
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Specifies the maximum rate on a logical port in cells per second (cps).
OC48: 50–5651320 cps
OC12: 50–1412830 cps
OC3: 50–353207 cps
T3: 50–96000 (PLCP) or 104268 (ADM) cps
E3: 50–80000 cps
Specifies the number of a service class template (SCT) for the egress direction. The
range is 0–255. Cisco provides a default of SCT 0 as well as SCT numbers 2 and 3.
You can modify one of these SCTs through the Cisco WAN Manager application and
assign another number within the SCT range to the new SCT. Subsequently, you can
assign the new SCT to the port with the sctID parameter in cnfport. To see the ID of
the current SCT for this port, use dspport.
State: active Privilege: GROUP1
Cisco MGX 8850 Routing Switch Command Reference
cnfport
3-35