Delcon - Cisco MGX 8850 Command Reference Manual

Routing switch

Hide thumbs Also See for Cisco MGX 8850:

Table of Contents

SPVC and SVC Commands

delcon

Delete Connection

Use the delcon command to delete an SPVC or SPVP. Delete the connection at both ends—first at the

master end, then at the slave.

Cards on Which This Command Runs

delcon <ifnum> <vpi> <vci>

Syntax Description

Related Commands

dspcon, addcon, cnfcon

MGX8850.1.3.AXSM.a > delcon 1 10 40

Deletion successful

Release 2.0, Part Number 78-10467-04 Rev C0, October 2001

Logical port number. On the AXSM, the range is 1–60.

Virtual path identifier in the range 0–255 (UNI) or 0–4095 (NNI or VNNI).

Virtual connection identifier (VCI):

For a VCC on a UNI, the range is 1–4095. On an NNI or VNNI, the VCI range is

32–65535. For MPLS, the recommended minimum VCI is 35.

For a VPC, the vci is 0.

State: active

Privilege: GROUP1

Cisco MGX 8850 Routing Switch Command Reference

Table of Contents