Dspload - Cisco MGX 8850 Command Reference Manual

Chapter 3 Equipment and Resource Provisioning

dspload

Display Load
Display the current level of usage of various parameters on a partition. To convey a picture of what is
available on a resource partition, the display shows the configured bandwidth and connection numbers
and what has actually been utilized.
Cards on Which This Command Runs
AXSM
Syntax
dspload <ifNum> <partId>
Syntax Description
ifNum
partId
Related Commands
dsprscprtn, addcon, dspcons, dspcon, cnfcon
Attributes
Log: no log
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Logical interface (port) number. For AXSM, the range is 1–60.
The partition identifier. The range is 1–5. If necessary, use dsprscprtns to see the
existing partitions.
State: active, standby Privilege: ANYUSER
Cisco MGX 8850 Routing Switch Command Reference
dspload
3-79