Cisco MGX 8850 Command Reference Manual page 136

loadrev
Pre-release, developmental versions have one or two alphanumeric characters at the end of the version
number, and these versions may appear in various contexts. For example, the help display for setrev
gives examples of revision, but only the first two in the following list could be in released product. These
two bullets show major release 2, minor release 1, and the minimal maintenance number of 1. The last
three bullets show developmental revision numbers:
•
•
•
•
•
Cards on Which This Command Runs
PXM45
Syntax
loadrev <slot> <revision>
Syntax Description
slot
revision
Related Commands
abortrev, commitrev, runrev, setrev, dspversion, dspcd
Attributes
Log: log
Example
Load version 2.0(0.4) to the AXSM in slot 5.
pinnacle.7.PXM.a > loadrev 5 2.0(0.4)
Cisco MGX 8850 Routing Switch Command Reference
2-78
2.0(1) Note the absence of a patch number.
2.0(1.248) Note the patch number is 248.
2.0(0.1)A1 Note the phase number is A1.
2.0(0.10)D2 Note the phase number is D2.
2.0(0.248)P1, 2.0(0.1)P2, 2.0(0.113)P3, 2.0(0.10)P4
The number of the targeted card slot.
Revision number derived from the firmware file. See
State: active
Chapter 2
"Version Numbering
Privilege: SERVICE_GP
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Shelf Management Commands
Conventions."