Cisco MGX 8850 Command Reference Manual page 154

svcifconfig
llcencap | vcmux
default | nodefault
reset
delete
force
clrstats
Related Commands
ipifconfig, dspipif, dspsvcif, dspipifcache
Attributes
Log: no log
Example
First configure the AESA for the local (PXM45) side, then configure the AESA for the router. This case
uses the defaults for encapsulation (llcencap) and ARP (enabled).
sfo.7.PXM.a >
sfo.7.PXM.a >
Cisco MGX 8850 Routing Switch Command Reference
2-96
Applies to the router link only. This parameter specifies encapsulation. The
choice primarily depends on whether the router supports LLC Snap
encapsulation (llcsnap). The alternative is VC-based multiplexing (vcmux).
(Optional) Specifies whether this SVC is the default route on the interface.
(Optional) Reset of the SVC. The SVC is freed, then the call is attempted again.
(Optional) Delete the specified AESA configuration.
(Optional) Force the SVC to be reset or deleted.
Use the force option with reset or delete if reset or delete appears to be hung.
(Optional) Clear all SVC statistics on this interface.
State: active
svcifconfig
arm0 local 47.0091.8100.0000.1010.1010.1010.1010.1010.1010.10
svcifconfig
arm0 router 47.0091.8100.0000.0101.0101.0101.0101.0101.0101.01
Chapter 2
Privilege: SUPER_GP
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Shelf Management Commands