Dsppnportloscallrel - Cisco MGX 8850 Command Reference Manual

dsppnportloscallrel

dsppnportloscallrel
Display PNNI Port Loss of Signal Call Release
This command displays the enable status of the LOS call release feature. See cnfpnportloscallrel for a
description of this feature.
Cards on Which This Command Runs
PXM45
Syntax
dsppnportloscallrel <portid>
Syntax Description
portid
Related Commands
cnfpnportloscallrel
Attributes
Log: no log
Example
First, confirm that LOS call release is disabled on port 3:1.1:1. Enable it, then confirm that it's enabled.
8850_NY.8.PXM.a > dsppnportloscallrel 3:1.1:1
Call release on Los :disabled
8850_NY.8.PXM.a > cnfpnportloscallrel 3:1.1:1 yes
8850_NY.8.PXM.a > dsppnportloscallrel 3:1.1:1
Call release on Los :enabled
Cisco MGX 8850 Routing Switch Command Reference
9-124
The portid represents the PNNI logical port and has the format
[shelf.]slot[:subslot].port[:subport]. See also
State: active, standby
PNNI Format, page
Privilege: ANYUSER
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter 9 Troubleshooting Commands
9-3.