About This Manual - Cisco MGX 8850 Command Reference Manual

About This Manual

Welcome to the command line interface (CLI) documentation for the Cisco MGX™ 8850 wide area
routing switch, Release 2.
This chapter discusses:
•
•
•
•
•
•
Cisco documentation and additional literature are available in a CD-ROM package, which ships with
your product. The Documentation CD-ROM, a member of the Cisco Connection Family, is updated
monthly. Therefore, it might be more current than printed documentation. To order additional copies of
the Documentation CD-ROM, contact your local sales representative or call customer service. The
CD-ROM package is available as a single package or as an annual subscription. You can also access
Cisco documentation on the World Wide Web at http://www.cisco.com, http://www-china.cisco.com, or
http://www-europe.cisco.com.
If you are reading Cisco product documentation on the World Wide Web, you can submit comments
electronically. Click Feedback in the toolbar, select Documentation, and click Enter the feedback
form. After you complete the form, click Submit to send it to Cisco. We appreciate your comments.
Objectives
This publication provides instructions for using the MGX 8850 commands in the CLI.
Audience
The Cisco command line interface lets you control the network from a level somewhat below that
provided by Cisco WAN Manager (formerly Cisco StrataView Plus). This document helps network
designers and operators to set up, manage, and troubleshoot networks.
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Objectives
Audience
Organization
Related Documentation
Conventions
Command Changes
Cisco MGX 8850 Routing Switch Command Reference
xxi