Cisco MGX 8850 Command Reference Manual page 488

Chapter 6 Logical Node, Port, and Signaling Commands
dspfltset
Example
Geneva.7.PXM.a > dspfltset SanJose
FilterName: SanJose
Index: 1
Address: 1234567890123456789012345678901234567890
AddrLen: 160 bits
AddrPlan: Nsap
AccessMode: Permit
AddrList: Calling
---------------------------------------
FilterName: SanJose
Index: 2
Address: 1234567890123456789012345678901234567891
AddrLen: 160 bits
AddrPlan: Nsap
AccessMode: Deny
AddrList: Called
---------------------------------------
Output example for the command
dspfltset
Filter Number: 1
FilterName: SanJose
ScreeningDigits: 40
CgPtyAbsentAction: Permit
CdPtyAbsentAction: Deny
---------------------------------------
Filter Number: 2
FilterName: Sunnyvale
ScreeningDigits: 20
CgPtyAbsentAction: Deny
CdPtyAbsentAction: Deny
Geneva.7.PXM.a >
Cisco MGX 8850 Routing Switch Command Reference
6-70
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001