Dncon - Cisco MGX 8850 Command Reference Manual

dncon

dncon
Down Connection
Administratively deactivates (or "downs") so you can modify or troubleshoot the network. This
operation applies to only SPVCs. To reactivate the connection, use upcon.
Cards on Which This Command Runs
AXSM
Syntax
dncon
ifNum
<
<vpi>
<vci>
Syntax Description
ifNum
vpi
vci
Related Commands
upcon
Attributes
Log: log
Cisco MGX 8850 Routing Switch Command Reference
7-34
>
The logical port number. The range for AXSM is 1–60.
Virtual path identifier. On a UNI, the range is 0–255. On an NNI, the range is 0–4095.
For a virtual connection (VCC) on a UNI, the range is 1–4095. On an NNI or VNNI,
the VCI range is 32–65535. For MPLS, the recommended minimum VCI is 35.
For a virtual path connection (VPC), the VCI is always 0.
State: active
Chapter 7
Privilege: GROUP1
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
SPVC and SVC Commands