Dspoamsegep - Cisco MGX 8850 Command Reference Manual

dspoamsegep

dspoamsegep
Display OAM Segment Endpoint
Displays whether or not the given port (portid) is designated as an OAM Segment Endpoint. See
cnfoamsegep.
Operation, administration, and maintenance (OAM) is an ATM Forum specification for cells used to
monitor virtual circuits. OAM cells provide a virtual circuit-level loopback which demonstrates whether
a circuit is up or not.
Cards on Which This Command Runs
PXM45
Syntax
dspoamsegep <portid>
Syntax Description
portid
Related Commands
cnfoamsegep
Attributes
Log: no log
Example
Display OAM Segment Endpoint for slot 1, port 1.
MGX8850.7.a > dspoamsegep 1.1
Cisco MGX 8850 Routing Switch Command Reference
7-48
The portid represents the PNNI physical port and has the format
[shelf.]slot[:subslot].port[:subport]. See also
State: active
Chapter 7
PNNI Format, page
Privilege: ANYUSER
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
SPVC and SVC Commands
7-4.