Dsppnportloscallrel - Cisco MGX 8850 Command Reference Manual

Chapter 8 Network Optimization Commands

dsppnportloscallrel

Display PNNI Port Loss of Signal Call Release
This command displays the enable status of the LOS call release feature. See cnfpnportloscallrel for a
description of this feature.
Cards on Which Command Executes
PXM45
Syntax
dsppnportloscallrel <portid>
Sybtax Description
portid
Related Commands
cnfpnportloscallrel
Attributes
Log: no log
Example
First, confirm that LOS call release is disabled on port 3:1.1:1. Enable it, then confirm that it's enabled.
8850_NY.8.PXM.a > dsppnportloscallrel 3:1.1:1
Call release on Los :disabled
8850_NY.8.PXM.a > cnfpnportloscallrel 3:1.1:1 yes
8850_NY.8.PXM.a > dsppnportloscallrel 3:1.1:1
Call release on Los :enabled
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
See PNNI Format, page 8-4. The portid represents the PNNI logical port and has the
format [shelf.]slot[:subslot].port[:subport].
State: active, standby Privilege: ANYUSER
Cisco MGX 8850 Routing Switch Command Reference
dsppnportloscallrel
8-15