Chapter 6
Logical Node, Port, and Signaling Commands
dspsscop
Display SSCOP—display SSCOP details for a PNNI port.
The dspsscop command displays information about the state of the link on the port, status inquiry and
response timers, and statistics.
Cards on Which This Command Runs
PXM45
Syntax
dspsscop <portid>
Syntax Description
portid
Related Commands
cnfsscop, disablesscop, dspsscopstats
Attributes
Log: nolog
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
The portid is the PNNI physical port. The format is [shelf.]slot[:subslot].port[:subport].
See also
PNNI Format, page
State: active, standby
6-4.
Privilege: ANYUSER
Cisco MGX 8850 Routing Switch Command Reference
dspsscop
6-111