Dsplogs - Cisco MGX 8850 Command Reference Manual

dsplogs

dsplogs
Display Logs—display a list of all existing log files.
The dsplogs shows the existing log files (but not the file contents). The dsplogs command lets you see
which files exist and thus determine specific contents to view when you execute dsplog.
Cards on Which This Command Runs
PXM45
Syntax
dsplogs
Syntax Description
This command takes no parameters.
Related Commands
dsplog
Attributes
Log: no log
Example
The output shows that one log file exists. To view the contents of the log file 1, you would enter
dsplog -log 1. See description of dsplog.
jdlenoir.7.PXM.a > dsplogs
Current Event log number: 01
Event log 01:
starting timestamp: 11/16/2000-13:29:13
Cisco MGX 8850 Routing Switch Command Reference
9-120
State: active, standby, init
C:/LOG/event01.log
Chapter 9 Troubleshooting Commands
Privilege: ANYUSER
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001