Dspatmaddr - Cisco MGX 8850 Command Reference Manual

dspatmaddr

dspatmaddr
Display ATM Addresses—displays active ATM addresses on a port.
The output of dspatmaddr includes configured ATM addresses, configured ILMI address prefixes, and
ATM addresses registered by way of the ILMI address registration procedure.
Cards on Which This Command Runs
PXM45
Syntax
dspatmaddr <portid>
Syntax Description
portid
Related Commands
dspaddr
Attributes
Log: log
Examples
Display the ATM addresses and prefixes on port 2:1.1:1.
Geneva.7.PXM.a > dspatmaddr 2:1.1:1
Port Id: 2.1
Configured Port Address(es):
ILMI Configured Port Prefix(es):
ILMI Registered Port Address(es):
length: 160
scope:
Geneva.7.PXM.a >
Cisco MGX 8850 Routing Switch Command Reference
6-66
The portid is the PNNI physical port. The format is [shelf.]slot[:subslot].port[:subport]. See
also PNNI Format, page
State: active, standby
39.840f.8011.3744.0000.0040.1005.3456.7834.7777.77
length: 160
scope: 0
47.0091.8100.0000.0000.0ca7.9e01
88.8888.8888.0000.0000.0000.0000
47.0091.8100.0000.0000.0ca7.9e01.1234.5678.9012.34
88.8888.8888.0000.0000.0000.0000.1234.5678.9012.34
type: internal
0 plan: nsap-dcc
Chapter 6
6-4.
Privilege: ANYUSER
type: internal proto: local
plan: nsap-dcc redistribute: false
proto: local
redistribute: false
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Logical Node, Port, and Signaling Commands