Cisco MGX 8850 Command Reference Manual page 651

Chapter 9 Troubleshooting Commands
5.
AXSM Offline Diagnostics
1.
2.
3.
4.
5.
6.
7.
8.
Syntax
cnfdiag <slot> <onEnb> <offEnb>
[<offCover> <offStart> <offDow>]
Syntax Description
slot
onEnb
offEnb
offCover
offStart
offDow
Cards on Which This Command Runs
PXM45
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
• NovRAM Checksum Test
Cell Path Test
CBC Cell Path Test - Backplane Side
•
Framer Cell Path Test - Port Side
•
Humvee / Transceiver / Crossbar Switch Cell Path Test
•
I/O PLD data bus test
Skystone Framer register & RAM test.
Humvee ASIC register test
CBC register test
ATMizer RAM test
QE48 register and RAM test
NovRAM checksum test
Flash EPROM checksum test
The slot of the card for which to configure the diagnostics.
Enable or disable online diagnostics. The default is disable.
Enable or disable offline diagnostics. The default is disable.
Set the offline diagnostics coverage time to light, medium, or full.
light = 5 minutes or less
•
medium = 30 minutes or less
•
full = 60 minutes or more
•
Set the time for the offline diagnostics to begin using 24 hour time. The format is:
hh:mm. For example: 03:45 or 22:30.
Sets the day of the week for the offline diagnostics to run.The format is SMTWTFS.
For example: -M-W--- is Mondays and Wednesdays only
Cisco MGX 8850 Routing Switch Command Reference
cnfdiag
9-33