Delchanloop - Cisco MGX 8850 Command Reference Manual

delchanloop

delchanloop
Delete Channel Loopback
Delete a loopback from a connection (channel). For an understanding of the purpose of channel
loopbacks, see the description of addchanloop.
Cards on Which This Command Runs
AXSM
Syntax
delchanloop <ifNumber> <vpi> <vci>
Syntax Description
ifNumber
vpi
vci
Related Commands
addchanloop, dspchanloop
Attributes
Log: log
Example
Remove the loopback from VPI/VCI 1 50 on logical port 4.
pop20two.1.AXSM.a > delchanloop 4 1 50
Cisco MGX 8850 Routing Switch Command Reference
9-46
The logical port number. The range for AXSM is 1–60.
The VPI of the connection. The range is 0–4095.
The VCI of the connection. The range is 1–65535.
State: active, standby
Chapter 9
Privilege: SERVICE_GP
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Troubleshooting Commands