Clrallcnf - Cisco MGX 8850 Command Reference Manual

clrallcnf

clrallcnf
Clear All Configurations
Deletes the configuration of all the cards in the switch. After clrallcnf, you need to reconfigure the
switch. (See setrev.)
The clrallcnf command clears all configuration information except for the boot IP address (see
bootchange) and the time of day.
Caution Be absolutely sure you need to execute clrallcnf because it clears all configuration files on the
PXM45. After you enter clrallcnf, the system prompts you to confirm the action.
Cards on Which This Command Runs
PXM45
Syntax
clrallcnf
Related Commands
None
Attributes
Log: no log
Example
Clear all the configuration elements for all the cards in the node. The system prompts for confirmation.
node1.7.PXM.a > clrallcnf
All SM's config will be deleted, and
Do you want to proceed (Yes/No)?
Cisco MGX 8850 Routing Switch Command Reference
2-16
State: active, init
the shelf will be reset.
Chapter 2
Privilege: SERVICE_GP
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Shelf Management Commands