Cnfpnni-Mtu - Cisco MGX 8850 Command Reference Manual

cnfpnni-mtu

cnfpnni-mtu
Configure PNNI Maximum Transfer Unit
The cnfpnni-mtu command specifies the maximum data packet size in number of bytes. This command
is useful for internetworking compatibility, for which you must match the maximum packet size of your
peer group to a size that another peer group can support. Although this command applies primarily to
internetwork compatibility, you can also use it in trials to test the affect of various packet sizes on the
performance of the peer group.
Use dsppnni-mtu to display the PNNI packet size configuration.
Cards on Which This Command Runs
PXM45
Syntax
cnfpnni-mtu <mtu>
Syntax Description
mtu
Related Commands
dsppnni-mtu
Attributes
Log: log
Example
This example shows the cnfpnni-mtu command line that specifies the maximum PNNI packet size to
3002 bytes. Use dsppnni-mtu to display the specified information.
SanJose.7.PXM.a > cnfpnni-mtu 3002
SanJose.7.PXM.a > dsppnni-mtu
max packet size: 3002
SanJose.7.PXM.a >
Cisco MGX 8850 Routing Switch Command Reference
5-26
— specify the maximum data packet size that the node supports.
Specify maximum transmit unit in number of bytes.
Range: 2048–8192 bytes
Default: 2048 bytes
State: active Privilege: SUPER_GP
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter 5 PNNI Commands