Pnni Commands - Cisco MGX 8850 Command Reference Manual

PNNI Commands

This chapter describes the private network to network (or node to network) interface (PNNI) commands.
These commands apply to node addressing and routing on the Cisco MGX 8850 switch, Release 2.0. (For
PNNI port and signaling commands, see the chapter,
The commands in this chapter have the following applications:
Configuration
•
–
–
–
–
–
–
–
–
–
• Deleting
–
–
Displays of:
•
–
–
–
–
–
–
–
–
–
–
–
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Link selection
Node addresses and identifiers
Packet size
PNNI interface
PNNI timers
RCC variables
Routing policies
Scope map table
PNNI summary address
A logical node
A PNNI summary address
Debug information
Learned nodes
Link information
Neighbor addresses
Node addresses and identifiers
Packet information
Paths
Reachable addresses
Routing policy
System address tables
Timers
C H A P T E R
"Logical Node, Port, and Signaling
Cisco MGX 8850 Routing Switch Command Reference
5
Commands.")
5-1