Delcontroller - Cisco MGX 8850 Command Reference Manual

Routing switch

Hide thumbs Also See for Cisco MGX 8850:

Table of Contents

Equipment and Resource Provisioning

delcontroller

Delete Controller

Delete a controller. The delcontroller command does not erase the controller software but directs the

switch not to use it.

Cards on Which This Command Runs

delcontroller <cntrlrId>

Syntax Description

Related Commands

addcontroller, dspcontrollers

Delete controller 3. In this example, the 3 is the reserved controller ID for LSC.

MGX8850.8.PXM.a > delcontroller 3

Release 2.0, Part Number 78-10467-04 Rev C0, October 2001

The controller ID (cntrlrId) has a range of 1–20 and is assigned by using the

addcontroller command. To see all controllers on the switch, use dspcontrollers.

State: active

Privilege: SUPER_GP

Cisco MGX 8850 Routing Switch Command Reference

delcontroller

Table of Contents