Cnffdonaal5 - Cisco MGX 8850 Command Reference Manual

Chapter 6 Logical Node, Port, and Signaling Commands

cnffdonaal5

Configure Nodal Frame Discard
The cnffdonaal5 command lets you determine whether the switch can use frame discard for AAL5 cells.
Use the dspsigparm command to see the enable status of frame discard for AAL5 cells.
Cards on Which This Command Runs
PXM45
Syntax
cnffdonaal5 yes | no
Syntax Description
yes
no
Related Commands
dspsigparm
Attributes
Log: log
Examples
Disable frame discard for AAL5 cells on the switch.
Geneva.7.PXM.a > cnffdonaal5 no
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Install frame discard on the presence of the AAL5 IE. The default is yes.
Do not install frame discard on the presence of the AAL5 IE.
State: active Privilege: SUPER_GP
Cisco MGX 8850 Routing Switch Command Reference
cnffdonaal5
6-23