Dsptrapip - Cisco MGX 8850 Command Reference Manual

Chapter 6 Logical Node, Port, and Signaling Commands

dsptrapip

Display Trap IP
The dsptrapip command displays the switch trap IP address. The switch must have a trap IP assigned
by the cnftrapip command.
Cards on Which This Command Runs
PXM45
Syntax
dsptrapip
Syntax Description
This command takes no parameters.
Related Commands
cnftrapip, dsptrapmgr, addtrapmgr, deltrapmgr
Attributes
Log: log
Example
Assign and confirm a trap IP address.
SanJose.7.PXM > cnftrapip 172.27.27.184
SanJose.7.PXM > dsptrapip
Trap IP Address :172.27.27.184
SanJose.7.PXM >
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
State: active Privilege: GROUP1
Cisco MGX 8850 Routing Switch Command Reference
dsptrapip
6-115