Verifying the Smart Call Home Configuration
Step 4
Step 5
Example
The following example shows how to enable Smart Call Home:
switch# configuration terminal
switch(config)# callhome
switch(config-callhome)# callhome send diagnostic
switch(config-callhome)# callhome test
switch(config-callhome)#
Verifying the Smart Call Home Configuration
Use one of the following commands to verify the configuration:
Command
show callhome
show callhome destination-profile name
show callhome pending-diff
show callhome status
show callhome transport-email
show callhome user-def-cmds
show running-config [callhome |
callhome-all]
show startup-config callhome
show tech-support callhome
Sample Syslog Alert Notification in Full-Text Format
This sample shows the full-text format for a syslog port alert-group notification:
source:MDS9000
Switch Priority:7
Cisco Nexus 3548 Switch NX-OS System Management Configuration Guide, Release 7.x
70
Command or Action
switch(config-callhome) # callhome test
(Optional) switch(config)# copy
running-config startup-config
Purpose
Sends a test message to all configured
destinations.
Saves the change persistently through reboots
and restarts by copying the running
configuration to the startup configuration.
Purpose
Displays the status for Smart Call Home.
Displays one or more Smart Call Home destination profiles.
Displays the differences between he pending and running
Smart Call Home configuration.
Displays the Smart Call Home status.
Displays the e-mail configuration for Smart Call Home.
Displays CLI commands added to any alert groups.
Displays the running configuration for Smart Call Home.
Displays the startup configuration for Smart Call Home.
Displays the technical support output for Smart Call Home.
Configuring Smart Call Home