Dspaddr - Cisco MGX 8850 Command Reference Manual

Chapter 6 Logical Node, Port, and Signaling Commands

dspaddr

Display Address
The dspaddr command displays ATM addresses and associated information for a UNI or IISP. For
details on the displayed items, see the addaddr description. The items in the display are as follows:
•
•
•
•
•
•
Cards on Which This Command Runs
PXM45
Syntax
dspaddr <portid>
Syntax Description
portid
Related Commands
addaddr, deladdr
Attributes
Log: nolog
Examples
Display the ATM address and other details for port 3:1.1:1.
8850_NY.8.PXM.a > dspaddr 3:1.1:1
47.0091.8100.0002.0003.6b5e.30c0
length: 104
scope: 0
8850_NY.8.PXM.a >
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
ATM addresses on the port and the length of each
Address plan
The type of address—internal or external
The protocol for advertising the address
The choice for address distribution
The scope—applicable to multi-peer groups only
The portid is the PNNI physical port. The format is [shelf.]slot[:subslot].port[:subport].
See also PNNI Format, page
State: active, standby
type: internal
plan: nsap_icd
6-4.
Privilege: ANYUSER
proto: local
redistribute: false
Cisco MGX 8850 Routing Switch Command Reference
dspaddr
6-65