Dspndparms - Cisco MGX 8850 Command Reference Manual

dspndparms

dspndparms
Display Node Parameters—display the current node-level parameters specified by cnfndparms.
The node parameters in this case are a general set of diverse parameters. Refer to cnfndparms for a
description of the parameters and possible values.
Cards on Which This Command Runs
PXM45
Syntax
dspndparms
Syntax Description
This command takes no parameters.
Related Commands
cnfndparms
Attributes
Log: no log
Example
Display the current node parameters.
MGX8850.7.PXM.a > dspndparms
MGX8850 System Rev: 02.01
MGX8850
NODE CONFIGURATION OPTIONS
Opt#
----
1
2
3
4
5
6
Cisco MGX 8850 Routing Switch Command Reference
2-60
State: active, standby
Sep. 04, 2001 12:08:16 PST
Value Type
----- ----
3600 16bit Decimal
3 8bit Decimal
Yes Boolean
No Boolean
0x0 8bit Hex
0x0 8bit Hex
Privilege: ANYUSER
Node Alarm: CRITICAL
Description
-----------
SHM Card Reset Sliding Window (secs)
SHM Max Card Resets Per Window (0 = infinite)
Core Redundancy Enabled
Expanded Memory on PXM45B Enabled
Required Power Supply Module Bitmap
Required Fan Tray Unit Bitmap
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter 2 Shelf Management Commands