Dspipconntask - Cisco MGX 8850 Command Reference Manual

dspipconntask

dspipconntask
Display IP Connectivity Task
Display the current state of the IP connectivity task. As a part of a troubleshooting regimen, the
dspipconntask command can help you isolate a problem related to IP connectivity.
Cards on Which This Command Runs
AXSM
Syntax
dspipconntask
Related Commands
ipifconfig, dspipif, dspipifcache, setipconndebug
Attributes
Log: no log
Example
Display the task information IP connection on the PXM45. Note that the Task Debug Level can be
modified through the setipconndebug command.
MGX8850.7.PXM.a > dspipconntask
IP CONNECTIVITY TASK INFORMATION
----------------------------------------------------------
Task State:
Card State:
Task Id:
Subtask Id:
Disk API State:
SyncRam API State:
Task SyncRam State:
Task Disk Update Bitmap:
Task SyncRam Update Bitmap:
Task Debug Level:
Task Logging To:
M8850_LA.7.PXM.a >
Cisco MGX 8850 Routing Switch Command Reference
2-56
State: active, standby, init
Device Table: 0 0
Disk: 0 0
IO Links: 0 0
Interface Cache: 0 0
BootChange Sync: 0 0
Privilege: ANYUSER
ACTIVE
READY
0x10010
0x1005c
OK
OK
UPDATE
0
0
0
0
0
0x1
Event Log
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter 2 Shelf Management Commands