Cisco MGX 8850 Command Reference Manual page 392

dsppnni-ptse
scope
address info length
address count
reachable address prefixes
External Reachable ATM Address IG Parameters
type
length
flags
port id
scope
address info length
address count
reachable address prefixes
Horizontal Links IG Parameters
type
length
flags
Cisco MGX 8850 Routing Switch Command Reference
5-98
The UNI 4.0 address scope.
Note
The length of the address information—an eight-bit number.
The number of reachable addresses—a 16-bit number.
Display any PNNI summary address reachable by the node. The
length of addressprefix is set by prefixlength.
The current release does not support exterior reachable addresses.
Note
The ASCII string that indicates the type of the exterior reachable
ATM address IG parameters.
A 16-bit number.
A string of 8-bit flags.
The logical port number of the PNNI port. This format is a 32-bit
number.
Range: 1–2147483648
An 8-bit number.
An 8-bit number.
The current release does not support exterior reachable addresses.
A 16-bit number.
Display any exterior PNNI summary address reachable by the node.
The length of addressprefix is set by prefixlength.
The ASCII string that indicates the type of the horizontal link IG
parameters.
A 16-bit number.
A string of 8-bit flags.
The current release does not support UNI 4.0, so the
scope is '0'.
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter 5 PNNI Commands