Dsppnni-Summary-Addr - Cisco MGX 8850 Command Reference Manual

dsppnni-summary-addr

State
Summary address
prefixlength
Related Commands
addpnni-summary-addr, delpnni-summary-addr
Attributes
Log: nolog
Example
Display the PNNI address prefixes. This command line does not specify node-index, so the output
contains all PNNI summary addresses in the peer group rather than a specific node. In this case, only a
single peer group exists.
Geneva.7.PXM.a > dsppnni-summary-addr
node index: 1
Type..............
State............. advertising
Summary address........47.0091.8100.0000.0030.ff0f.ef38/104
node index: 1
Type..............
State.............
Summary address........47.0091.8100.0000.0010.7b65.f260/104
Geneva.7.PXM.a >
Cisco MGX 8850 Routing Switch Command Reference
5-116
This system-generated ASCII string indicates the advertisement state.
Possible states: "advertising," "notadvertised," or "inactive"
The ATM PNNI summary address assigned to the network. The default is a
combination of the peer group ID appended with the switch MAC address.
The length of the summary address-prefix in number of bits, equal or less than
152 bits. In the current release, the zero-length PNNI summary address is not
supported.
State: active, standby Privilege: ANYUSER
internal
internal
inactive
Suppress..............
Suppress..............
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter 5 PNNI Commands
false
false