Cnfdiagall - Cisco MGX 8850 Command Reference Manual

Chapter 9 Troubleshooting Commands

cnfdiagall

Configure Diagnostics All
This command enables and configures online or offline diagnostics for all card slots. (This command is
the same as cnfdiag except that it effects all slots instead of just one.)
When you enter this command with no parameters, it displays the current configuration and status of the
diagnostics.
Note See the cnfdiag command for a detailed description of MGX 8850 diagnostics.
Syntax
cnfdiagall <onEnb> <offEnb>
[<offCover> <offStart> <offDow>]
Syntax Description
onEnb
offEnb
offCover
offStart
offDow
Cards on Which This Command Runs
PXM45
Related Commands
cnfdiag, dspdiagcnf
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Enables online diagnostics.
Enables offline diagnostics.
Sets the offline diagnostics coverage time to light, medium, or full.
light = 5 minutes or less
•
• medium = 30 minutes or less
full = unlimited
•
Sets the time for the offline diagnostics to begin using 24 hour time. The format is:
hh:mm
For example: 03:45 or 22:30.
Sets the day of the week for the offline diagnostics to run. The format is SMTWTFS.
Enter a dash (-) for days on which you do not want diagnostics to run. For example:
-M-W--- is Mondays and Wednesdays only
Cisco MGX 8850 Routing Switch Command Reference
cnfdiagall
9-35