Resetsys - Cisco MGX 8850 Command Reference Manual

Chapter 9 Troubleshooting Commands

resetsys

Reset System
Reset the entire node.
Cards on Which This Command Runs
PXM45
Syntax
resetsys
Syntax Description
This command takes no parameters but displays a warning and prompts you to continue the execution.
Related Commands
resetcd
Attributes
Log: no log
Example
Reset the system.
pinnacle.7.PXM.a > resetsys
This command resets the entire shelf, a destructive command.
Please confirm now!
Do you want to proceed (Yes/No)? n
(command not executed)
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
State: active, init Privilege: SUPER_GP
Cisco MGX 8850 Routing Switch Command Reference
resetsys
9-151