Dsppnportcac - Cisco MGX 8850 Command Reference Manual

Chapter 6 Logical Node, Port, and Signaling Commands

dsppnportcac

Display Port Call Admission Control
Displays CAC policy parameters for the port as configured by cnfpnportcac. For a list of the displayed
items, see the Example section. For a description of these items, see the cnfpnportcac description.
Cards on Which This Command Runs
PXM45
Syntax
dsppnportcac <portid>
Syntax Description
portid
Related Commands
cnfpnportcac
Attributes
Log: log
Example
Display the CAC parameters for port 3:2.2:4.
8850_NY.7.PXM.a > dsppnportcac 3:2.2:4
bookFactor:
maxBw:
100.0000%
minBw:
100.0000%
maxVc:
minVc:
maxVcBw:
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
The portid is the PNNI physical port. The format is [shelf.]slot[:subslot].port[:subport].
See also PNNI Format, page
State: active, standby
cbr: rt-vbr:
sig:
100%
100%
100.0000% 100.0000%
0.0000% 0.0000%
100%
100%
0%
1%
0
0
6-4.
Privilege: ANYUSER
nrt-vbr:
100% 100%
100.0000%
0.0000%
100% 100%
0% 0%
0 0
Cisco MGX 8850 Routing Switch Command Reference
dsppnportcac
ubr: abr:
100% 100%
100.0000% 100.0000%
0.0000% 0.0000%
100% 100%
0% 0%
0 0
6-89