Clrallcnf - Cisco MGX 8850 Command Reference Manual

Chapter 9 Troubleshooting Commands

clrallcnf

Clear All Configurations
Clear all configurations for all the cards in the node. After you enter the command, the system prompts
you to confirm the action.
Caution Be absolutely sure you need to execute this command because it clears all configuration files on the
PXM45. After clrallcnf, you need to reconfigure the switch.
Cards on Which This Command Runs
PXM45
Syntax
clrallcnf
Related Commands
restoreallcnf
Attributes
Log: log
Example
Clear all the configuration elements for all the cards in the node.
node1.7.PXM.a > clrallcnf
All SM's config will be deleted, and
Do you want to proceed (Yes/No)?
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
State: active, init
the shelf will be reset.
Privilege: SERVICE_GP
Cisco MGX 8850 Routing Switch Command Reference
clrallcnf
9-9