Delclksrc - Cisco MGX 8850 Command Reference Manual

Chapter 2 Shelf Management Commands

delclksrc

Delete Clock Source
Deletes a user-specified primary or secondary clock source. Changing a clock source or changing the
priority of the source (primary or secondary) are the most frequent uses of delclksrc. See the description
of cnfclksrc for these common uses of delclksrc.
If the node has a redundant PXM45, it automatically receives changes you make to the clock
Note
configuration as well as automated changes to clock status that occur under node management. For
example, executing delclksrc is a configuration change that the standby card automatically
implements. Also, a switch from primary to secondary clock source is also recorded by the standby
PXM45.
Cards on Which This Command Runs
PXM45
Syntax
delclksrc <priority>
Related Commands
cnfclksrc, dspclksrcs, dspclkalms
Attributes
Log: log
Example
Delete the primary clock source.
pinnacle.7.PXM.a> delclksrc primary
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
State: active Privilege: SUPER_GP
Cisco MGX 8850 Routing Switch Command Reference
delclksrc
2-41