Delrscprtn - Cisco MGX 8850 Command Reference Manual

delrscprtn

delrscprtn
Delete Resource Partition
Delete a resource partition. Note that you must delete all connections in the resource partition before you
delete it. For information on resource partitions, refer to the description of addrscprtn.
Note The delpart and delrscprtn commands are identical. The name 'cnfrscprtn' is consistent with the
corresponding command in Release 1 of the MGX 8850 switch. You can use either command.
Cards on Which This Command Runs
AXSM
Syntax
delrscprtn <if_num> <part_id>
Syntax Description
if_num
part_id
Related Commands
addrscprtn, dsprscprtns
Attributes
Log: log
Example
MGX8850.1.9.AXSM.a > delrscprtn 1 1
Cisco MGX 8850 Routing Switch Command Reference
3-44
Logical interface (port) number. For AXSM, the range is 1–60.
The partition ID number in the range 1–5. Use dsprscprtns to see all resource
partitions if necessary.
State: active
Chapter 3 Equipment and Resource Provisioning
Privilege: GROUP1
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001