Conntrace - Cisco MGX 8850 Command Reference Manual

conntrace

conntrace
Call Control Operations
Trace an established connection and display the result.
Cards on Which This Command Runs
PXM45
Syntax
conntrace <portid>
callref
[EndPtRef]
Syntax Description
portid
callref
EndPtRef
Related Commands
pathtraceport, pathracenode, pathtraceie
Attributes
Log: log
Examples
Result:Succ/Fail Reason: " Desc"
InterfaceId: "--" EndptRef: "--"
Originating Interface VPI: " --"
Originating Interface VCI: " --"
Originating Interface CallRef: " --"
NodeId Egress Port Vpi Vci CallRef PhysPortid
XXXX ZZZZ aaa bbb cccc eeee
XXXX ZZZZ aaa bbb cccc eeee
Terminating Interface VPI: " --"
Terminating Interface VCI: " --"
Terminating Interface CallRef: " --"
Cisco MGX 8850 Routing Switch Command Reference
9-42
The portid represents the PNNI logical port and has the format
[shelf.]slot[:subslot].port[:subport]. See also
Call reference for the call.
Endpoint reference for a p2mp call. If no endpoint reference is specified, this is a p2p
call.
State: active Privilege: SUPER_GP
Chapter 9 Troubleshooting Commands
PNNI Format, page 9-3.
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001